APC Smart-UPS RT 20kVA RM 230V


Availability: In stock

Excl. Tax: AED41,651.95 Incl. Tax: AED43,734.55

Quick Overview

APC Smart-UPS On-Line,16 kW /20 kVA,Input 230V, 400V 3PH /Output 230V, Interface Port DB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot, Extended runtime model, Rack Height 12 U

Be the first to review this product

Product Datasheet

View FileProduct Data Sheet    Size: (511.59 KB)



LCD display  
Alpha-Numeric Display which displays system parameters and alarms.
Dual mains input 
Increases availability by allowing the UPS to be connected to two separate power sources.
Manageable external batteries 
Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
Rack/Tower convertible 
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Removable input/output wiring tray 
Allows quick and easy installation and maintenance of the UPS.
Single or three-phase input wireable 
Provides flexibility for the UPS to be installed using either single or three-phase input wiring.

Smart-UPS On-Line Features & Benefits

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Network manageable
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Additional Information

Output Power 1.30 KWatts
Output Voltage 230 Volts
Input Frequency 40 - 70 Hz (auto sensing)
Input Volatge Range 160 - 280 V
Interface Ports RJ-45 Serial, Smartslot
Control Panel Multi-function LCD status and control console
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Recharge Time 2.5 hour(s)
Audible Alarm Audible and visible alarms : configurable delays
Cord Length -
Approvals BSMI, EN/IEC 62040-2, EN/IEC 62040-1-1, VDE
Dimensions 533 x 432 x 773 mm
Shipping Dimensions 990 x 610 x 1003 mm
Weight 247.7300
Shipping Weight 314.09
Manufacturer No

Write Your Own Review

Only registered users can write reviews. Please, log in or register